Many customers have asked why PET bottles with poor transparency. Here are the reasons and solutions.
Reason:
1. The heating temperature is too high.
2. The heating time is too long.
3. The compressed air contains moisture.
4. Preform problem. (you need find out the reason from the injection molding machine line)
5. The rationality of preform design
6. The inflation ratio is too small, the thickness of preform etc.
Solutions
1. To cool down
2. Shorten the heating time of the machine
3. Use a dryer to remove water
4. Improve the preform quality, select materials and improve the dryness of raw materials
5. Improve preform size design
6. Reduce preform diameter
Winiber, offers different range of PET bottle blowing machine, from 800BPH to 15000BPH. By the high quality product, the good sevice, cooperates sincerely with you.

I am not sure where you’re getting your info, but good topic.
I needs to spend some time learning much more
or understanding more. Thanks for fantastic information I was looking for
this information for my mission.
Terrific article! This is the kind of information that
are supposed to be shared around the web. Disgrace on the search engines for no longer positioning this submit higher!
Come on over and visit my site . Thanks =)
I’ve been exploring for a bit for any high quality articles or blog posts on this kind of space . Exploring in Yahoo I ultimately stumbled upon this web site. Studying this info So i’m happy to convey that I’ve an incredibly just right uncanny feeling I found out just what I needed. I most unquestionably will make sure to do not put out of your mind this site and give it a glance on a continuing basis.